Electric heater with electronic thermostat and timer function model QSX
The newest model – heater QSX is equipped with an electronic touch system, which lets the user set the heater to the desired temperature, indicated on the panel.
The heater has got the TIMER-2H function, which allows to set the working time of the heater for 2 hours. We have also added the masking element, thanks to which the connecting cable, inserted directly into the wall, is invisible.
You can set the desired temperature from 5 to 65 oC.
Advantages of QSX
1. BACKER heating element
- heating element is equipped with temperature limit fuse and internal temperature sensor.
- possibility of detaching the thermostat from the heating element and its mounting after installation.
2. Modern touch-control system
- easy setting by touching the marked place on the sensor.
- increased sealing level, reduced chance of moisture ingress.
- functional operating programme.
3. Indication of heating element operation by a glowing line at the bottom of the casing.
4. Marking of the radiator temperature by elliptical lamp.
5. Masking element, which allows to hide the cable in the wall.
Indication modes
- blue – cold radiator
- green – radiator temperature suitable for drying towels
- red – radiator temperature high, requires careful use, depending on the fabric type
- red flashing light – radiator temperature above 65 degrees, possible overheating of the radiator, requiring everything to be removed from the radiator and thermostat operation checked
– temperature indication is active at all times while the thermostat is on, regardless of the way the radiator is heated, either by the heater or the central heating.
5 Thermostat operating mode:
5.1 Asterisk (*)
- 5°C temperature range used in order to secure against freezing. Thermostat will switch into this mode after SELF TEST and during the reset following power supply loss.
5.2 Heating temperature mode
- 40-50-55°C temperature modes for drying and heating
- 65°C – mode recommended only for heating
5.3 Timer setting - Time
Possibility of setting the determined operation time of 2h.
Electric heater with electronic thermostat and timer function model QS
The heater with electronic thermostat type QS, is a device used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator heating. It has modern touch-control system and the possibility of setting the determined operation time for 2h.
Advantages of QS
1. BACKER heating element
- heating element is equipped with temperature limit fuse and internal temperature sensor.
- possibility of detaching the thermostat from the heating element and its mounting after installation.
2. Modern touch-control system
- easy setting by touching the marked place on the sensor.
- increased sealing level, reduced chance of moisture ingress.
- functional operating programme.
3. Indication of heating element operation by a glowing line at the bottom of the casing.
4. Marking of the radiator temperature by elliptical lamp.
Indication modes
- blue – cold radiator
- green – radiator temperature suitable for drying towels
- red – radiator temperature high, requires careful use, depending on the fabric type
- red flashing light – radiator temperature above 65 degrees, possible overheating of the radiator, requiring everything to be removed from the radiator and thermostat operation checked
– temperature indication is active at all times while the thermostat is on, regardless of the way the radiator is heated, either by the heater or the central heating.
5 Thermostat operating mode:
5.1 Asterisk (*)
- 5°C temperature setting used in order to secure against freezing. Thermostat will switch into this mode after SELF TEST and during the reset following power supply loss.
5.2 Heating modes
- 40-50-55°C temperature modes for drying and heating
- 65°C – mode recommended only for heating
5.3 Timer setting
Possibility of setting the determined operation time of 2h.
Electric heating element type MEK
The MEK type is intended for heating different systems: small, such as towel rails, as well as bigger ones, like radiators in the central heating systems. It was designed to be easily installed into all types of tubes, cast, steel and aluminium radiators.
The MEK type appliance is made of the highest quality, attested materials and components, providing the warranty for perfect functioning.
Advantages
The advantages of MEK over other alternative sources of heating:
- Made with high quality components,
- Possibility of a precise temperature regulation (5-70˚C),
- rubber seal prevents water leakage,
- Saves energy by giving the possibility of heating only one room instead of turning the whole central heating on,
Eco-friendly packing solution.
Electric heating elements type GTX
The new model GTX is the effect of CINI’s presence on the Polish and European market and its previous experience with heating technology.
It is used for heating the systems such as radiators in bathrooms, towel dryers, or as additional element for already existing systems of radiator-heating. It works perfectly in the stainless steel radiators.
 GTX lifetime is extended by using the stainless steel heating element (1) and adding the capillary (2) with temperature sensor (3) at the tip of it, which allows for a very precise measurement and control over the temperature of the liquid, in which the element is immersed. Special fuse (4) protects model GTX against dry running in case of water loss. It is also worth mentioning that our heating elements are made by a well-known and proven leader among manufacturers – Backer OBR. |
Advantages of GTX
-
- Made with high quality components,
- Possibility of precise temperature regulation (5-70˚C),
- Ring-shaped indicator lamp can be seen from all the angles,
- rubber seal prevents water leakage,
- thermal fuse prevents overheating,
- housing made of two elements allows for an easy access to the potentiometer,
- design matches modern, as well as traditional radiators and towel heaters,
- Saves energy by providing the possibility of heating only one room instead of turning the whole central heating on,
- Eco-friendly packing solution.
